Circuit RIAA Stereo Preamplifier NE5534
The left and right inputs are performed both on a 100kOhm
resistor (R4 and R11) which acts as load resistance for the turntable. The value of this resistance can be lowered, but not below 47K.
Amplification and RIAA correction is provided by two
amplifiers, operational, slightly better than the NE5534 and NE5532 is also known for low noise levels.
Frequency Corrections follow the curve which forms depends on the value of the resistors and capacitors that are used around the op amp: R5 to R8 and C6 to C9 for the left channel (upper circuit), R12 to R15 and C12 to C15 for the right channel (bottom circuit). Amplification (gain) is defined by the voltage on the resistor value. Resistors R5 and R12 standardize the frequency response to a value slightly greater than 35KHz. Two op amp frequency compensation is not necessary, thus improving their dynamic performance (better rise time ).