Function Generator Object
The High Speed Function Generator was published in the professional electronics section of the Aug 1996 issue of
Electronics Australia, and has proven to be extremely popular. The kit is no longer available from any of the kit suppliers.
There is a problem with the TTL output when the generator is used on the LOW and MEDIUM frequency ranges AND the MAIN
frequency adjust control is set to the lower 15% of it's range. Any significant loading on the TTL output will cause it to osscillate on the positive and negative edges. This is apparently an inherent problem with the MAX038 chip !. The only solution is to buffer the SYNC output of the MAX038 with a 74HC14 schmitt inverter. This can be mounted on a small piece of vero-board along with R10 and a bypass capacitor. Use the other 5 inverters in the package in parallel to provide a high current buffered output. Be sure to connect the supply pins of the 74HC14 directly to pins 15 and 16 of the MAX038.
YES, those electro's are hanging over the edge of the PCB. I didn't have anything else available, and Jaycar was closed !. This one didn't have the TTL output, that was a last minute inclusion in the second prototype that was published, hence the oversight described below.